Previous product
US96-EN Pushbutton
Back to products
Next product
US92 Pushbutton

US94 Pushbutton

The US94 Pushbutton is a classic square button with a clean, timeless appearance. It has a black surround with an opal pressel, which is covered by a clear cap. On call acceptance the whole of the opal pressel illuminates and there are a wide variety of colour options.

  • 15mm legend
  • Classic design
  • Complete pressel illumination
  • Range of pressel legends
  • Meets EN60529 (IP54)
Categories: ,
Description

Pushbutton Options

Body Type

Compact 2

  • High grade polycarbonate
  • LED current 20mA
  • Spade or screw terminals
  • Shunt boards for easy installation
  • 2 n/o, 1 n/o & 1 n/c or 2 n/c contacts as standard
  • UL/CSA approved

Compact 2 Micro

  • Micro movement
  • Very shallow <20mm
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Wide range of connector options
  • 1 n/o contact only (other options available through a relay board)
  • UL/CSA approved

Compact 3

  • Shallow
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Spade or screw terminal
  • Shunt boards for easy installation
  • 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
  • UL/CSA approved

Compact 3 Profile

  • Micro movement
  • Shallow, less than 20mm deep
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Spade or screw terminal
  • Push in Wago connectors
  • Cable size up to 0.75mm2
  • 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
  • UL/CSA approved

Click options above for more detail

Material Finish

  • OpalOpal/Black

Illumination Colour

  • RedRed
  • AmberAmber
  • GreenGreen
  • BlueBlue
  • WhiteWhite

Illumination Action

Single

  • Before call acceptance – Both legend and halo are NON illuminated
  • After call acceptance – Both legend and halo illuminated at FULL brightness any colour

Dual

  • Before call acceptance – Both legend and halo are DIM illuminated any colour.
  • After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.

Note: DIM and FULL brightness are the same colour.

Bicolour

  • Before call acceptance – Both legend and halo are DIM illuminated white.
  • After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.

Note: Due to DIM colour (white) adding to FULL brightness colour. FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.

Bicolour +

  • Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
  • After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.

Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.

Click options above for more detail

Product Enquiry

Additional information
Product Shape

Square

Body Type

Compact 2, Compact 2 Micro, Compact 3, Compact 3 Profile

Illumination Colour

Red, Amber, Green, Blue, White

Illumination Action

Single, Dual, Bicolour

Related products

Close

Jumbo US90 Pushbutton

The US90 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US90 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
  • 30mm high tactile legend
  • Matches standard US90 Compact 2 range
  • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
  • Matching range includes keyswitches, rocker switches and indicators
  • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP54)
  • Two body depths available, standard and low profile
  • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
  • Large range of pressel legends
  • Vandal resistant with stainless steel front
Quick view
Close

US91 Bar Pushbutton

The Compact 2 Bar Button has been designed as an extra long button and is ideal for use as a main floor button, where its extra size helps users to quickly identify that floor. The Compact 2 Bar Button matches our circular ranges (US91, US91-15 and US95) but can also be used in conjunction with all our ranges. The design of the button is based on the standard Compact 2, so you can be sure of its long life, durability and vandal resistance.
  • Extra long button
  • 15mm tactile legend with Braille option
  • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
  • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication position or call acceptance
  • Large range of pressel legends
  • Matching range includes keyswitches, rocker switches and indicators
  • Vandal resistant with stainless steel front
  • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP44)
Quick view
Close

US90-EN Pushbutton

The US90-EN Pushbutton is a classic square button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
  • 15mm high tactile legend
  • High contrast between legend and pressel
  • Legend and halo illumination
  • Vandal resistant EN81-71 cat 2
  • Large range of pressel legends
  • Standard pressels are a black plate moulded with opal polycarbonate
Quick view
Close

US90 Pushbutton

The US90 Pushbutton offers a clean square frontal appearance that will enhance any lift. The US90 is based on our original US81 Pushbutton and is particularly durable with reliability assured in even the harshest of conditions. The illuminated legend provides clear identification and the button can be illuminated in a wide variety of colours.
  • 13mm high flush legend
  • Legend and halo illumination
  • Vandal resistant with stainless steelfront EN81-71 cat 2
  • Large range of pressel legends
  • Standard pressels are a stainless steel plate moulded with red or opal carbonate
Quick view
Close

US100 Pushbutton

The US100 Pushbutton is the most vandal resistant of the pushbuttons within our range. The stainless steel pressel is set within a stainless steel bezel, which it bottoms out on, making it highly resistant to impact attacks. Illumination is provided through a small insert moulded lens in the centre of the button. Although the US100 is extremely vandal resistant, its clean lines have made it very popular and it has been used in some of the most prestigious installations around the world as well as some of the harshest.
  • Classic design
  • Highly vandal resistant exceeds EN81-71 category 2
  • Pressel/surround assembly is locked to the faceplate
Quick view
Close

M-20 RET Pushbutton

The M-20 RET pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and pressel. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
  • No studding required
  • Separate legend and halo illumination
  • Large range of pressel legends
  • High contrast ratio between pressel and legend
  • 15mm high tactile legend (Moulded through)
  • Meets EN81-70
Quick view
Close

Jumbo US95-30EN Pushbutton

The US95-30EN Braille Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30EN Jumbo has an identical appearance to the standard US95-EN and so the two buttons can be used on faceplates together when appropriate.
Quick view
Close

Jumbo US91 Pushbutton

The US91 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US91 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
  • Legend and halo illumination
  • Large range of pressel legends
  • 30mm high tactile legend (Moulded through)
  • Vandal resistant EN81-71 cat 2
  • High contrast ratio between pressel and legend
Quick view
Close

US96-EN Pushbutton

The square shaped US96-EN Braille pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel back ground is black, providing good contrast with legend and faceplate and meets the requirements of EN81-70.
  • 15mm high tactile legend with Braille
  • Legend and halo illumination
  • Vandal resistant EN81-71 cat 1
  • Large range of pressel legends
  • High contrast ratio between pressel and legend
  • Standard pressels are a black plate moulded with grey polycarbonate
Quick view
Close

Jumbo US96-30EN Pushbutton

The US96-30EN Braille Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US96-30EN Jumbo has an identical appearance to the standard US96-EN and so the two buttons can be used on faceplates together when appropriate. The US96-30EN is available with the standard body or low profile, a useful option for surface mount.
Quick view
Close

US95 Pushbutton

The circular shaped US95 Braille Pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background can be either black, providing good contrast with legend and faceplate (US95EN), or stainless steel.
  • 15mm high tactile legend with Braille
  • Legend and halo illumination
  • Vandal resistant EN81-71 cat 2
  • Large range of pressel legends
  • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
Quick view
Close

US95-AB Antibacterial Pushbutton

The new US95-AB Pushbutton is manufactured with antibacterial protection to help prevent the unwanted growth of harmful bacteria. Bacteria can multiply on lift pushbuttons every 20 minutes. This technology makes product surface hostile to microscopic organisms, making them unable to live, grow and reproduce. Whilst providing protection the US95-AB Braille pushbutton also meets all the requirement for the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background is white polycarbonate providing good contrast with legend and faceplate.
Quick view