US92 Pushbutton
The US92 Pushbutton is a classic circular button with a clean timeless appearance. It has a black surround with an opal pressel, which is covered by a clear cap. On call acceptance the whole of the opal pressel illuminates and there are a wide variety of colour options.
- 15mm legend
- Classic Design
- Complete pressel illumination
- Range of pressel legends
- Meets EN60529 (IP54)
Description
Body Type
- Micro movement
- Very shallow <20mm
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Wide range of connector options
- 1 n/o contact only (other options available through a relay board)
- UL/CSA approved
- Shallow
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Shunt boards for easy installation
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
- Micro movement
- Shallow, less than 20mm deep
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Push in Wago connectors
- Cable size up to 0.75mm2
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
Click options above for more detail
Material Finish
Opal/Black
Illumination Colour
Red
Yellow
Green
Blue- White
Amber option also available
Illumination Action
- Before call acceptance – Both legend and halo are NON illuminated
- After call acceptance – Both legend and halo illuminated at FULL brightness any colour
- Before call acceptance – Both legend and halo are DIM illuminated any colour.
- After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.
Note: DIM and FULL brightness are the same colour.
- Before call acceptance – Both legend and halo are DIM illuminated white.
- After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.
Note: Due to DIM colour (white) adding to FULL brightness colour. FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.
- Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
- After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.
Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.
Click options above for more detail
Product Enquiry
Additional information
| Product Shape |
Round |
|---|---|
| Body Type |
Compact 2 ,Compact 2 Micro ,Compact 3 ,Compact 3 Profile |
| Illumination Colour |
Red ,Amber ,Green ,Blue ,White |
| Illumination Action |
Single ,Dual ,Bicolour ,Bicolour+ |
Related products
US91-EN Pushbutton
The US91-EN Pushbutton is a classic circular button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
- 15mm high tactile legend
- High contrast between legend and pressel
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a black plate moulded with opal polycarbonate
US96-EN Pushbutton
The square shaped US96-EN Braille pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel back ground is black, providing good contrast with legend and faceplate and meets the requirements of EN81-70.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant EN81-71 cat 1
- Large range of pressel legends
- High contrast ratio between pressel and legend
- Standard pressels are a black plate moulded with grey polycarbonate
M-20 RET Pushbutton
The M-20 RET pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and pressel. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
- No studding required
- Separate legend and halo illumination
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 15mm high tactile legend (Moulded through)
- Meets EN81-70
US90 Jumbo Pushbutton
The US90 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US90 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
- 30mm high tactile legend
- Matches standard US90 Compact 2 range
- Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
- Matching range includes keyswitches, rocker switches and indicators
- Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP54)
- Two body depths available, standard and low profile
- A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
- Large range of pressel legends
- Vandal resistant with stainless steel front
US90-30 Jumbo Pushbutton
The US90-30 Jumbo Pushbutton is a classic square extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30 Jumbo has an identical appearance to the standard US90-15 and so the two buttons can be used on faceplates together when appropriate.
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 30mm high tactile legend + Braille (Embossed)
US90-EN Jumbo Pushbutton
The US90-EN Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-EN Jumbo has an identical appearance to the standard US90-EN and so the two buttons can be used on faceplates together when appropriate.
- Legend and halo illumination
- Large range of pressel legends
- 30mm high tactile legend (Moulded through)
- Vandal resistant EN81-71 cat 2
- High contrast ratio between pressel and legend
- Meets EN81-70
US91-30 Jumbo Pushbutton
The US91-30 Jumbo Pushbutton is a classic round extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
- 30mm high tactile legend
- Matches standard US91-15 Compact 2 range
US95 Jumbo Pushbutton
The US95 Braille Jumbo Pushbutton is a classic round extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend with illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95 Jumbo has an identical appearance to the standard US95 and so the two buttons can be used on faceplates together when appropriate.
US95-EN Jumbo Pushbutton
The US95-EN Braille Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-EN Jumbo has an identical appearance to the standard US95-EN and so the two buttons can be used on faceplates together when appropriate.
US96 Jumbo Pushbutton
The US96 Braille Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US96 Jumbo has an identical appearance to the standard US96 and so the two buttons can be used on faceplates together when appropriate. The US96 is available with the standard body or low profile, a useful option for surface mount.
US85 Jumbo Pushbutton
The US85 benefits uses the full range of square Jumbo pressels. The button was designed not only to meet the requirements of EN81-70 Annex G.1, but also for use in larger buildings such as hospitals, airports and shopping centres, where the shear scale of the building necessitates a larger button. Using the EN range you have a black background with tactile legend (Braille optional) and this provides the contrast for EN81-70. Also available are stainless steel pressels again with tactile legends and optional Braille
- 30mm high tactile legend with optional Braille
- Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
- Large range of pressel legends
- Matching range includes keyswitches, rocker switches and indicators
- Vandal resistant
US91 Bar Pushbutton
The Compact 2 Bar Button has been designed as an extra long button and is ideal for use as a main floor button, where its extra size helps users to quickly identify that floor.
The Compact 2 Bar Button matches our circular ranges (US91, US91-15 and US95) but can also be used in conjunction with all our ranges. The design of the button is based on the standard Compact 2, so you can be sure of its long life, durability and vandal resistance.
- Extra long button
- 15mm tactile legend with Braille option
- A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
- Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication position or call acceptance
- Large range of pressel legends
- Matching range includes keyswitches, rocker switches and indicators
- Vandal resistant with stainless steel front
- Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP44)
