US100 Pushbutton
Back to products
US90-EN Pushbutton

US89 Pushbutton

The timeless design of the US89 Pushbutton has proven to be very successful over the years. The obround shape is a refreshing alternative to the more common round or square shape.The US89 is available with Compact 3 or Compact 3P bodies.

The illuminated tactile legend clear identification and the button can be illuminated in a wide variety of colours.

  • 13mm high tactile legend
  • Legend & halo illumination
  • Vandal resistant with stainless steel front EN81-71 cat 2
  • Large range of pressel legends
  • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
Categories: ,
Description

Pushbutton Options

Body Type

Compact 2 Micro

  • Micro movement
  • Very shallow <20mm
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Wide range of connector options
  • 1 n/o contact only (other options available through a relay board)
  • UL/CSA approved

Compact 3

  • Shallow
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Spade or screw terminal
  • Shunt boards for easy installation
  • 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
  • UL/CSA approved

Compact 3 Profile

  • Micro movement
  • Shallow, less than 20mm deep
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Spade or screw terminal
  • Push in Wago connectors
  • Cable size up to 0.75mm2
  • 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
  • UL/CSA approved

Click options above for more detail

Material Finish

  • Brushed Stainless Steel Brushed Stainless Steel
  • Mirror Stainless Steel Mirror Stainless Steel
  • Brushed Brass Brushed Brass
  • Mirror Brass Mirror Brass

Illumination Colour

  • RedRed
  • YellowYellow
  • GreenGreen
  • BlueBlue
  • WhiteWhite

Illumination Action

Single

  • Before call acceptance – Both legend and halo are NON illuminated
  • After call acceptance – Both legend and halo illuminated at FULL brightness any colour

Dual

  • Before call acceptance – Both legend and halo are DIM illuminated any colour.
  • After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.

Note: DIM and FULL brightness are the same colour.

Bicolour

  • Before call acceptance – Both legend and halo are DIM illuminated white.
  • After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.

Note: Due to DIM colour (white) adding to FULL brightness colour. FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.

Bicolour +

  • Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
  • After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.

Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.

Click options above for more detail

Product Enquiry

    Additional information
    Product Shape

    Barrel

    Product Finish

    Brushed Brass, Brushed Stainless Steel, Mirror Brass, Mirror Stainless Steel

    Body Type

    Compact 2, Compact 2 Micro, Compact 3, Compact 3 Profile

    Illumination Colour

    Red, Amber, Green, Blue, White

    Illumination Action

    Single, Dual, Bicolour, Bicolour+

    Related products

    US90 Pushbutton

    The US90 Pushbutton offers a clean square frontal appearance that will enhance any lift. The US90 is based on our original US81 Pushbutton and is particularly durable with reliability assured in even the harshest of conditions. The illuminated legend provides clear identification and the button can be illuminated in a wide variety of colours.
    • 13mm high flush legend
    • Legend and halo illumination
    • Vandal resistant with stainless steelfront EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a stainless steel plate moulded with red or opal carbonate
    Quick view

    US96-EN Jumbo Pushbutton

    The US96-EN Braille Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US96-EN Jumbo has an identical appearance to the standard US96-EN and so the two buttons can be used on faceplates together when appropriate. The US96-EN is available with the standard body or low profile, a useful option for surface mount.
    Quick view

    US96-EN Pushbutton

    The square shaped US96-EN Braille pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel back ground is black, providing good contrast with legend and faceplate and meets the requirements of EN81-70.
    • 15mm high tactile legend with Braille
    • Legend and halo illumination
    • Vandal resistant EN81-71 cat 1
    • Large range of pressel legends
    • High contrast ratio between pressel and legend
    • Standard pressels are a black plate moulded with grey polycarbonate
    Quick view

    US91-15 Pushbutton

    The US91-15 Braille Pushbutton meets all the requirements of the visually impaired. As well as the 15mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The illuminated tactile legend provides clear identification and the button can be illuminated in a wide variety of colours.
    • 15mm tactile legend with Braille
    • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
    • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
    • Large range of pressel legends
    • Matching range includes keyswitches, rocker switches and indicators
    • Vandal resistant with stainless steel front
    • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP54), AS1735 Part12 with H/C surround & dual illumination
    Quick view

    US90-30 Jumbo Pushbutton

    The US90-30 Jumbo Pushbutton is a classic square extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30 Jumbo has an identical appearance to the standard US90-15 and so the two buttons can be used on faceplates together when appropriate.
    • Legend and halo illumination
    • Vandal resistant EN81-71 cat 2
    • Large range of pressel legends
    • High contrast ratio between pressel and legend
    • 30mm high tactile legend + Braille (Embossed)
    Quick view

    US90-EN Jumbo Pushbutton

    The US90-EN Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-EN Jumbo has an identical appearance to the standard US90-EN and so the two buttons can be used on faceplates together when appropriate.
    • Legend and halo illumination
    • Large range of pressel legends
    • 30mm high tactile legend (Moulded through)
    • Vandal resistant EN81-71 cat 2
    • High contrast ratio between pressel and legend
    • Meets EN81-70
    Quick view

    US91 Pushbutton

    The US91 Pushbutton is a classic circular button with a clean timeless appearance. The illuminated legend provides clear identification and the button can be illuminated in a wide variety of colours.
    • 15mm high tactile legend
    • Legend and halo illumination
    • Vandal resistant with stainless steel front EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
    Quick view

    US97-EN Pushbutton

    The US97-EN Pushbutton has been designed to meet the requirements of EN81-70 and pr EN81-40/41 which requires the pushbutton legend to have a height of 15mm. The pushbutton benefits from a brightly illuminated white legend for easy viewing in darkness as well as daylight.
    • 15mm tactile legend
    • High contrast between legend and pressel
    • Legend & halo illumination can be controlled individually
    • Large range of pressel legendsVandal resistant and weatherproof
    • Meets EN81-1/2, EN81-70, EN81-72, EN81-73, EN60529 (IP66 & IP67)
    Quick view

    US91-EN Pushbutton

    The US91-EN Pushbutton is a classic circular button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
    • 15mm high tactile legend
    • High contrast between legend and pressel
    • Legend and halo illumination
    • Vandal resistant EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a black plate moulded with opal polycarbonate
    Quick view

    M-20 REB Pushbutton

    The M-20 REB pushbutton with Braille has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and the pressel, with the added advantage of Standard English Braille. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
    • No studding required
    • Separate legend and halo illumination
    • Large range of pressel legends
    • High contrast ratio between pressel and legend
    • 15mm high tactile legend + Braille (Moulded through)
    • Meets EN81-70
    Quick view

    US91-30 Jumbo Pushbutton

    The US91-30 Jumbo Pushbutton is a classic round extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
    • 30mm high tactile legend
    • Matches standard US91-15 Compact 2 range
    Quick view

    US91 Bar Pushbutton

    The Compact 2 Bar Button has been designed as an extra long button and is ideal for use as a main floor button, where its extra size helps users to quickly identify that floor. The Compact 2 Bar Button matches our circular ranges (US91, US91-15 and US95) but can also be used in conjunction with all our ranges. The design of the button is based on the standard Compact 2, so you can be sure of its long life, durability and vandal resistance.
    • Extra long button
    • 15mm tactile legend with Braille option
    • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
    • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication position or call acceptance
    • Large range of pressel legends
    • Matching range includes keyswitches, rocker switches and indicators
    • Vandal resistant with stainless steel front
    • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP44)
    Quick view