Uniblade Lantern plus Lift ID
The UniBlade is our flexible design for both lanterns and lift identifiers. The design is clean and modern, with a range of colour options for the body such as natural, black and white.
The UniBlade lantern + ID combines two products to clearly identify the lift that a user has been assigned to, as well as providing assurance to the user that the lift is heading in their desired direction.
- Smart, modern appearance
- Clear identification of both lift and direction of travel
- Easy installation
- Optional speaker for gong can be fitted in mounting bracket
Description
Related products
UL200 Hall Lanterns
The UL200 LED Illuminated Pyramid Lantern Arrow is an economically priced vandal resistant arrow, whose clean design will match the decor of any lift. The high brightness LED illumination ensures a brilliant and clearly illuminated arrow, easily visible at long distances and from wide angles. This product meets the requirements of EN81-70 for landing signals.
- Economically priced
- Vandal resistant EN81-71 cat 2
- Bright clear illumination
- Easily visible at long distances and wide angles
- Can be used in combination with most displays
- Range of colours including red, green, white and blue
- Two options available – 2D arrow and the 3D arrow
Uniblade Lantern
The UniBlade is our new design for hall lanterns. The design is clean and modern, with a range of colour options for the body such as natural, black and white.
We also offer a wide range of illumination options. The UniBlade lantern is ideal for use in a lift lobby where there are three or more cars and it is not always easy to see which lift has arrived. The UniBlade stands out at right angles to the wall and when illuminated, clearly identifies the lift that has arrived.
- Smart, modern appearance
- Wide range of colour options
- Easy installation, with or without faceplate
- Optional speaker for gong can be fitted in mounting bracket
CJ70 Electronic Gong
The Dewhurst CJ70 Serial Electronic Gong is an audible indication for lift arrival at a floor, which also has output to control lantern arrows. This low profile serial unit offers the choice of a single or double tone and is designed to be connected to the Dewhurst 4 wire serial encoders (CH024/034 or CX-Basic). The CJ70 is suitable for use with the Dewhurst Profile station, which could also include the 30mm and 50mm ULSP digital display unit.
- Serial gong (used without displays)
- Outputs to control lantern arrows
- Single or double tone
- Low profile
- Can be used to meet M2/S2 Building Regulations
- Adjustable volume
- Works with CH024/CH034 Serial Encoder or CX-Basic Encoder Board
Uniblade Flush Lantern
The UniBlade Flush is our new design for hall lanterns. The design is clean and modern, with a range of colour options for the body such as natural, black and white. The UniBlade lantern is ideal for use in a lift lobby where there are three or more cars and it is not always easy to see which lift has arrived. The UniBlade Flush lantern is mounted flush to the wall and when illuminated, clearly identifies the lift that has arrived. The front panel of the UniBlade Flush Hall Lantern are available in black or white, with a range of illumination colours. The unit’s design looks ‘custom’ but this is a standard production unit that offers excellent value for money.
- Smart, modern appearance
- Front panel colour avialable in black or white, others colours on request
- Easy installation, with or without faceplate
- Meets DDA requirements
- Wide range of colour options
- Gong optional
CJ10 Flasher/Buzzer For Lifts
The CJ10 Flasher/buzzer is used to draw passenger attention to visual notices and warnings (e.g. Overload, Out of Service) and is used in conjunction with the Dewhurst hidden legend indicators. The DewhurstCJ10 is a single PCB comprising solid state circuitry and a one-piece terminal connector.
- Single PCB comprising solid state circuitry
- The CJ10 flasher unit is particularly useful for showing "overload" or "out of service" conditions
- If an audible warning is required, the Dewhurst CJ10 I also available with an integral buzzer
- Suitable for an a.c. supply or a smoothed d.c. supply
EN-Buzz
The EN-BUZZ has been designed to work with any button and controller where the button and illumination is wired using a 3 wire method. The common supply (24V d.c. ± 20%) to the button and illumination can be either polarity. One EN-BUZZ will be required for each set of car buttons and each landing station.
There are two types of EN-BUZZ available, Standard (used with grille) and loud (used without grille). A 110V d.c. Standard version is also available, please refer to publication number PB169.
- Creates a bleep tone each time a call button is pressed and acknowledged
- Adjustable volume
- 12 – 24Vdc & 110Vdc options available
- Conforms to EN81-70
- Standard and loud versions available
D Blade Indicator Lantern
The D Blade indicator lantern is ideally suited to prestigious office and apartment buildings where there are three or more lift cars. It is made out of high gloss black acrylic and has a clean contemporary design with an illuminated arrow which clearly identifies the lift that has arrived.
The blade is suitable for both flush mount and surface mount fixtures and it is available in two different size options:
- Terminal - one arrow indicator
- Intermediate - displays both arrow up and arrow down indicators
Blade Lantern
In a lift lobby of three or more cars, it is often difficult to see conventional lanterns when they illuminate. The blade lantern stands out very clearly and shows exactly which lift has arrived and its direction of travel. The appearance of the blade lantern is quite unique and the etched arrow is not really noticeable until it is illuminated.
The Blade Lantern is available for both flush mount and surface mount, with a range of arrow colours.
- Innovative design, with arrow floating in space
- Meets DDA requirement
- Provides lift with custom appearance
- Range of illumination colours
- Flush mount or surface mount
- Gong optional
Jumbo Hall Lantern
The Jumbo Hall Lantern is a modern design with a wide range of illumination options and faceplate finishes will match the décor of any lift.
The lantern is a 76mm wide equilateral triangle for a bolder look. The high brightness LED illumination ensures a brilliant and clearly illuminated arrow, easily visible at long distances and from wide angles.
This product meets the requirements of EN81-70 for landing signals.
- Bright clear illumination
- Easily visible at long distances and wide angles
- It can be used in combination with most displays
- Range of colours, including red, green, and white
