Previous product
Jumbo US95-30EN Pushbutton
Back to products
Next product
US85 Pushbutton

Jumbo US91-30EN Pushbutton

The US91-30EN Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.

Categories: ,
Description

Key Features

The US91-30EN Jumbo has an identical appearance to the standard US91-EN and so the two buttons can be used on faceplates together when appropriate.

  • 15mm high tactile legend with Braille (Embossed)
  • Vandal resistant with stainless steel front EN81-71 cat 2
  • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
  • Legend and halo illumination
  • Large range of pressel legends

Pushbutton Options

Body Type

Jumbo

  • High grade polycarbonate
  • LED current 20mA
  • Shunt boards for easy installation
  • 2 n/o or 1n/o and 1 n/c contacts
  • UL/CSA approved

Jumbo Profile

  • Very shallow <20mm
  • High grade polycarbonate
  • LED current 20mA
  • Shunt boards for easy installation
  • 2 n/o or 1n/o and 1 n/c contacts
  • UL/CSA approved

Click options above for more detail

Material Finish

  • Black Black
  • Green Green

Illumination Colour

  • RedRed
  • AmberAmber
  • GreenGreen
  • BlueBlue
  • WhiteWhite

Illumination Action

Single

  • Before call acceptance – Both legend and halo are NON illuminated
  • After call acceptance – Both legend and halo illuminated at FULL brightness any colour

Dual

  • Before call acceptance – Both legend and halo are DIM illuminated any colour.
  • After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.

Note: DIM and FULL brightness are the same colour.

Bicolour +

  • Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
  • After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.

Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.

Click options above for more detail

Product Enquiry

    Additional information
    Product Shape

    Round

    Product Finish

    Black, Green Exit Floor, Yellow Alarm

    Body Type

    Jumbo, Jumbo Profile

    Illumination Colour

    Red, Amber, Green, Blue, White

    Illumination Action

    Single, Dual, Bicolour+

    Related products

    Close

    US91-EN Pushbutton

    The US91-EN Pushbutton is a classic circular button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
    • 15mm high tactile legend
    • High contrast between legend and pressel
    • Legend and halo illumination
    • Vandal resistant EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a black plate moulded with opal polycarbonate
    Quick view
    Close

    Jumbo US91 Pushbutton

    The US91 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US91 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
    • Legend and halo illumination
    • Large range of pressel legends
    • 30mm high tactile legend (Moulded through)
    • Vandal resistant EN81-71 cat 2
    • High contrast ratio between pressel and legend
    Quick view
    Close

    M-20 RSB Pushbutton

    The M-20 RSB pushbutton with Braille has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other lift applications. The button has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
    • No studding required
    • Separate legend and halo illumination
    • Large range of pressel legends
    • High contrast ratio between pressel and legend
    • 15mm high tactile legend + Braille (Moulded through)
    Quick view
    Close

    US96-EN Pushbutton

    The square shaped US96-EN Braille pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel back ground is black, providing good contrast with legend and faceplate and meets the requirements of EN81-70.
    • 15mm high tactile legend with Braille
    • Legend and halo illumination
    • Vandal resistant EN81-71 cat 1
    • Large range of pressel legends
    • High contrast ratio between pressel and legend
    • Standard pressels are a black plate moulded with grey polycarbonate
    Quick view
    Close

    US92 Pushbutton

    The US92 Pushbutton is a classic circular button with a clean timeless appearance. It has a black surround with an opal pressel, which is covered by a clear cap. On call acceptance the whole of the opal pressel illuminates and there are a wide variety of colour options.
    • 15mm legend
    • Classic Design
    • Complete pressel illumination
    • Range of pressel legends
    • Meets EN60529 (IP54)
    Quick view
    Close

    US95-AB White Antibacterial Pushbutton

    The new US95-AB Pushbutton is manufactured with antibacterial protection to help prevent the unwanted growth of harmful bacteria. Bacteria can multiply on lift pushbuttons every 20 minutes. This technology makes product surface hostile to microscopic organisms, making them unable to live, grow and reproduce. Whilst providing protection the US95-AB Braille pushbutton also meets all the requirement for the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background is white polycarbonate providing good contrast with legend and faceplate.
    Quick view
    Close

    US95-EN Pushbutton

    The circular US95-EN Braille Pushbutton meets all the requirements of the visually impaired. The Braille dots below the legend are Standard English Braille. The pressel background is black, providing good contrast with legend and faceplate and meets the requirement of EN81-70.
    • 15mm high tactile legend
    • Legend halo illumination
    • Meets EN81-70
    • Vandal resistant EN81-71 cat 2
    • Large range of pressel legends in new font
    • High Contrast between pressel and legend
    • Standard pressels are black anodized plate moulded with opal polycarbonate
    Quick view
    Close

    US90-15 Pushbutton

    The US90-15 Braille Pushbutton meets all the requirements of the visually impaired. As well as the 15mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The illuminated tactile legend provides clear identification and the button can be illuminated in a wide variety of colours.
    • 15mm high tactile legend with Braille
    • Legend and halo illumination
    • Vandal resistant with stainless steel front EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
    Quick view
    Close

    M-20 RET Pushbutton

    The M-20 RET pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and pressel. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
    • No studding required
    • Separate legend and halo illumination
    • Large range of pressel legends
    • High contrast ratio between pressel and legend
    • 15mm high tactile legend (Moulded through)
    • Meets EN81-70
    Quick view
    Close

    US91 Optic Pushbutton

    The US91 OPTIC C3/C3P Pushbutton is a modern twist on a classic – a clean timeless appearance. The illuminated Braille Tag shows clear identification and can be illuminated in a wide variety of colours. The US91 Optic is available with any of our standard circular pressels be that the Belly Button (shown here), the classic US91 blank, bulls-eye or legend – the choice is yours.
    Quick view
    Close

    Jumbo US90-30EN Pushbutton

    The US90-30EN Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30EN Jumbo has an identical appearance to the standard US90-EN and so the two buttons can be used on faceplates together when appropriate.
    • Legend and halo illumination
    • Large range of pressel legends
    • 30mm high tactile legend (Moulded through)
    • Vandal resistant EN81-71 cat 2
    • High contrast ratio between pressel and legend
    • Meets EN81-70
    Quick view
    Close

    US89 Pushbutton

    The timeless design of the US89 Pushbutton has proven to be very successful over the years. The obround shape is a refreshing alternative to the more common round or square shape.The US89 is available with Compact 2, Compact 3 or Compact 3P bodies. The illuminated tactile legend clear identification and the button can be illuminated in a wide variety of colours.
    • 13mm high tactile legend
    • Legend & halo illumination
    • Vandal resistant with stainless steel front EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
    Quick view