Dewhurst supply a wide range of Digital Displays from simple dot matrix displays to large LCD displays which can stream live television or other multimedia.

We have extensive resources to provide customised programming of your screen and service support for peace of mind. Displays can be supplied loose or built into fixtures. The majority of applications now call for serial communication from an encoder down to the display but simple displays can also operate through discrete wiring.  Our encoder can also drive a plug on speech unit to provide audible indication of the lift position and direction.

View our range of Dot Matrix Displays or our LCD Displays for further information.

Showing all 26 results

Show sidebar
Show 36
Close

C1L LCD Colour Displays

A high quality, compact sized full colour display, the C1L is ideal as a position indicator display solution for residential buildings, both inside the car and on the lift landing. Offering finesse and style the display fully respects its surroundings and blends in effortlessly. The C1L is available in 3.5”*, 4.3”*, 5.6”, 7.0”, 8.0” and 10.4” sizes. *Slim profile versions available
  • Supports both landscape and portrait mode
  • Slim mechanical profile
  • Hall lantern/Gong control
  • EN 81-70 compliance
  • Backlight Control
  • Picture slideshow/User-defined messages at time intervals
  • On-board dip/tact switch control that allows flexibility in changing display settings
Close

SM018 Speech Synthesiser Board – MP3 Version

The new SM018 MP3 enhanced speech module has been specifically designed to plug into the Dewhurst CH024 & Ch034 Serial Encoder Board. Through dedicated inputs on the encoder it provides  facilities for floor identification, door opening, door closing, direction of travel as well as warning and information announcements.
  • Speech bandwidth is increased from 4KHz to 16KHz thereby providing better speech quality.
  • Speech Storage is on a MMC / SD card for easy modification to the speech files in memory.
  • It can announce up to 3 languages per floor.
  • It can play background music during idle period.
  • The 4 minute limit of the SM018 MP3 is increased to at least 800 minuntes of speech using a 128MB MMC card with moderate MP3 compression.
  • No limit of duration per phrase.
Close

CX–Speech MP3

The new CX-Speech MP3 is an enhanced version of the CX-Speech and hase been specifically designed to plug into the Dewhurst CX-Basic Serial Encoder Board. Through dedicated inputs on the encoder it provides facilities for floor identification, door opening, door closing, direction of travel as well as warning and information announcements.
  • It can announce up to 3 languages per floor.
  • It can play background music during idle period.
  • Approximately 800 minuntes of speech using a 128MB MMC card with moderate MP3 compression.
  • No limit of duration per phrase.
  • Speaker and line transformers supplied
  • Large vocabulary of English phrases
Close

CX-Speech Board

The CX-Speech Module has been specifically designed to plug into the Dewhurst CX-Basic Serial Encoder Board.  Through dedicated inputs on the encoder it provides facilities for floor identification, door opening, door closing, direction of travel as well as warning and information announcements.  There is a large vocabulary of English phrases that will cover the majority of requirements. However, custom phrases can be accommodated. The CX-Speech announcements provide clear information to lift users and are of particular importance to blind and partially sighted people for applications requiring compliance to Lift and Building Regulations.
  • Designed to plug into the CX-Basic Serial Encoder Board to add speech option
  • Provides facilities for floor ID, door opening, door closing, direction of travel as well as warning & info. announcements
  • Audio output 2.5W
  • Speaker and line tranformers supplied
  • Large vocabulary of English phrases
Close

CX-Synchro Board

The Encoder Card CX-Synchro is designed to be used in conjunction with serial controlled display units and the CX-Basic encoder board. The CX-Synchro board plugs into the CX-Basic board to add either 16 additional inputs, serial synchronisation port, or LCD display (plus pushbuttons) to allow on site settings of encoder.  The encoder has a serial communication port, used to connect to other CX-Synchro card to synchronise the real time clocks when LCD displays are being used. It also accepts signals like floor position code, as well as lift status signals like MAINTENANCE, OVERLOAD, OUT OF ORDER etc. through the additional 16 optoisolated inputs. The signals are then transmitted through SER1 of the CX-Basic board, which is a 4-wire serial communication link, to all the display units connected to it.
  • Designed to be used in conjunction with serial controlled display units & the CX-Basic Encoder Board
  • 16 opto inputs (12-24V ac/dc)
  • On board LED’s to monitor inputs
  • Real Time Clock (required for clock or date function on LCD displays)
  • Serial link (RS485) – Used to synchronise the real time clocks on all encoders in a group when LCD display are being used with clock/date function
Close

CX-Basic Encoder Board

The Serial Encoder Card CX-Basic is designed to be used in conjunction with serial controlled display units. The encoder has serial communication ports, SER1, SER2 and USB port and is installed in the lift machine room, next to the lift controller. It accepts signals like floor position code, directional arrows as well as lift status signals like MAINTENANCE, OVERLOAD, OUT OF ORDER etc. through 24 optoisolated inputs. The signals are then transmitted through SER1, which is a 4-wire serial communication link, to all the display units connected to it.
  • Designed to be used in conjunction with serial controlled display unit
  • 24 opto inputs (12-24V ac/dc)
  • On board LED’s to monitor inputs
  • Floor inputs can be programmed: One per floor, binary or Gray
  • Direction, doors opening/closing and gong control inputs are standard
  • Speech synthesiser option can be added by plugging in the CX-Speech Board
  • To add 16 additional inputs or add Real Time Clock (clock/date function on LCD displays) or add on board programming display (LCD) the CX-Synchro Board can also be plugged in
Close

SM018 Speech Synthesiser Board

The SM018 Speech Module has been specifically designed to plug into the Dewhurst CH024 or CH034 Serial Encoder Board. Through dedicated inputs on the encoder it provides facilities for floor identification, door opening, door closing, direction of travel as well as warning and information announcements.  There is a large vocabulary of English phrases that will cover the majority of requirements. However, custom phrases can be accommodated.  The SM018 announcements provide clear information to lift users and are of particular importance to blind and partially sighted people for applications requiring compliance to Lift and Building Regulations.
  • Plugs into CH024/CH034 serial encoder boards to add speech option
  • Audio output 2.5W
  • Speaker and line tranformers supplied
  • Adjustable volume for normal & hush mode
  • Provides facilities for floor ID, door opening, door closing, direction of travel as well as warning & info. announcements
  • Excellent sound quality as far as 300m from the encoder module
Close

CH024 and CH034 Encoder

The Serial Encoder Card CH024 is designed to be used in conjunction with serial controlled display units.  The encoder has serial communication port, SER1 and SER2 and is installed in the lift machine room, next to the lift controller. It accepts signals like floor position code, directional arrows as well as lift status signals like MAINTENANCE, OVERLOAD, OUT OF ORDER etc. through 24 optoisolated inputs.
  • Designed to be used in conjunction with serial controlled digital display units
  • CH024 has 24 opto inputs (1224Vac/dc)
  • CH034 has 34 opto inputs (1224Vac/dc)
  • Real time clock for LCD displays (CH034)
  • On board display & buttons for local programming (CH034 only)
Close

CH032 Encoder

The Serial Encoder Board CH032 is designed to be used in conjunction with serial controlled display units. The protocol used in the communication link between the display card and the encoder units are proprietary and subject to change without prior warning or notice.  The encoder has two serial output communication ports SER1 and SER2 and is installed in the lift machine room, next  to the lift controller. It accepts signals like floor position code, directional arrows, gongs, as well as lift status signals  like MAINTENANCE, OVERLOAD OUT OF ORDER etc. through 32 opto-isolated inputs.
  • Designed to be used in conjunction with serial controlled display units
  • 32 opto inputs
  • Real time clock
Close

E-Motive Accessories

Encoders & Converters E-Motive has a range of Encoder and Converter products to read signals from the lift controller and encode these signals to provide lift position and status information. Video Server Mini and Max The essential companion for our multimedia displays, it allows multicast streaming of digitized MPEG video with up to 6 streams at once, stream TV or composite video signals directly to the multimedia displays on your network. Navigation box Removes the need for connection to a lift controller Voice Annunciator Speech announcement of lift position and status information Background music in between speech announcements Synchronizer Provides date and time to displays
Close

iS2 Range

The premium offering for elevator and building displays, iS2 displays can provide building patrons with a full colour, multimedia experience. Along with lift direction and status information, these displays will showcase high definition corporate video, tenant advertising content or promote special events. The iS2 can also incorporate a live information feed for up-to-the minute news and entertainment and is perfect for use as digital signage within any building. Available in five sizes – 10.4” – 12.1” – 15.0” – 19.0” – 21.5”
  • Rich media integration and HD display
  • Wireless connection for content updating
  • Video/audio live streaming or recorded
  • Manage network media remotely
Close

MRP Retrofit Display

The MRP with Navigation box brings multimedia content to elevators with quick and easy installation. Update your display without having to worry about replacing the entire COP, wiring up to the controller or having the correct lift protocol. The MRP with separate processor can be mounted anywhere within the elevator car with minimal modification to the metalwork. Once installed easily configure your display via USB transfer or remote update from the Avire Hub* and it is ready to go. Simple, cost-effective, easy to use and in a range of colours to suit your lift interior. The installer-friendly MRP is the complete plug and play solution that can be used in any lift instantly creating a high end look and feel.
  • Save hours with a quick installation for retrofit applications
  • USB socket for enhanced programming
  • Does not need to be linked to the controller for lift information
  • Easy to use drag & drop content management software
  • High Quality Multimedia display
Close

Picture LCD PSP01

The PSP display is the simple and easy to use solution for modernisation and new installations. New on-board programming allows the flexibility to instantly update and configure the display onsite without need for a computer, saving the installer time and effort. Alternatively, the intuitive drag and drop layout designer makes it easy to design layouts to meet the requirements of any installation. The brand-new PSP display builds upon E-Motive’s experience of delivering quality displays, providing a slimmer design without loss of functionality. The PSP LCD display is an ideal choice for use in confined spaces and is available in 5.6”,7”,8” and 10.4”.
Close

PRP Display – The Retrofit Display

The E-Motive PRP with nav box is the only option for easily upgrading to a fantastic LCD solution. Fit the PRP display without having to worry about replacing the entire COP, wiring up to the controller, having the correct lift protocol or having the wrong configuration on the display. The PRP can be mounted anywhere within the elevator car with minimal modification to the metalwork. Once installed simply configure your layout using the on-board programming tool or via USB transfer using the drag and drop layout designer and your display is ready to go. The installer-friendly PRP is cost-effective and quick to fit. It is also available in a range of colours to improve the look and feel of any installation.
Close

Panorama Multimedia Ultra-Wide LCD

A revolutionary next-generation elevator media display, E-Motive® Panorama provides stunningly crisp, exciting visuals for an informative entertainment elevator experience.  Panorama uses LED-backlit LCD displays with enhanced dynamic contrast and brilliant colour depth, to provide vivid-coloured images. The display has flexible and configurable software allowing rich media broadcasting in 1/3 the size of a typical 16:9 screen. With a unique ultra-wide aspect ratio that enhances building space, the Panorama provides greater flexibility for users to design screen layouts. Panorama is available in 3 screen sizes at 19”, 28” and 38”.
  • Ultra-wide screen with high brightness
Close

S2 Range

Providing building owners with a full-colour, multimedia experience, the S2 from E-Motive is our premium offering for elevator and building displays. Together with elevator position and status information, this LCD showcases corporate video, tenant advertising content and special promotions. The S2 can also incorporate a live information feed for up-to-the-minute news and entertainment.  The screen layouts are easy to configure using E-Motive LCD Configuration Software and the screens are available in a wide range of sizes at 10.4”, 12.1”, 15” and 19”.
  • Standard models include 10.4″, 12.1″ and 15″ LCD screen sizes with the option of other sizes up to 42″ available upon request.
  • Portrait or landscape orientation
Close

US1 Touch Panel

The new Dewhurst US1 Touch Panel is a futuristic alternative to traditional pushbuttons. it allows you to create your own style of pushbutton on the touch screen with a background that fulfils your vision and enhances your corporate brand and identity. The US1 hardware is available in 3 sizes 21.5”, 18.5” and 15.6” displays with PCAP touch screen that allows users to activate the touch screen effortlessly with finger, glove or conductive  stylus. The CPU is an ARM processor with plenty of power to display full HD 1080p video content on the screen.  The whole unit is neatly self-contained in its housing and is less than 35mm in depth. Part of the package is an exclusive programming tool that allows our customers to update content independently such as text, video, images and general tenant information.  At a later date they can load any changes in just a few seconds over network using the LAN cable or with a USB flash drive that plugs in at the back of the panel.
Close

ULS32H/V

The indicator units come in a choice of three colours – red, amber and green. The ULS32’s can display up to 2 characters or one character with a directional arrow. Two character with override arrow is also available.
  • 30mm high 2 characters blocks
  • 7 rows x 10 colums, 3.0mm Dots
  • Depth with window 18.5mm
  • Display screen size 44.68mm x 39mm
  • Direction arrow and gong control
  • Scrolling arrow or legend
  • Available in red, amber and green
  • Programmed to your requirements
  • Serial and parallel options
  • Horizontal or vertical PCB orientation
Close

ULS43H

The ULS43’s can display up to three (39mm) characters or 3 + directional arrows, 2 rows of 8 (17mm) characters and a directional arrow, 2 rows of 8 (17mm) characters including directional arrows. UL43 can also be programmed for vertical mounting with the arrow above or below the single digit legend.  Having a flashing and/or scrolling facility for the arrows. If required, messages can also be programmed which will scroll in the same orientation as the PCB.
  • 39mm high 3 characters blocks
  • 16 rows x 48 colums, 1.8mm Dots
  • Depth with window 44mm
  • Display screen size 120mm x 40mm
  • Direction arrow and gong control
  • Scrolling arrow or legend
  • Available in red, amber and green
  • Programmed to your requirements
  • Serial and parallel options
  • Horizontal PCB orientation only
Close

ULS52H/V

The ULS52’s can display up to 2 characters or one character with a directional arrow. 2 character with override arrow is also available. The displays can also be programmed for vertical mounting. With flashing and/or scrolling facility for the arrows. If required, messages can also be programmed which will scroll in the same orientation as the PCB
  • 50mm high 2 characters blocks
  • 7 rows x 10 colums, 5.0mm Dots
  • Depth with window 44mm
  • Display screen size 76mm x 53.4mm
  • Direction arrow and gong control
  • Scrolling arrow or legend
  • Available in red, amber and green
  • Programmed to your requirements
  • Serial and parallel options
  • Horizontal or vertical PCB orientation
Close

ULS54H

The ULS54’s can display up to three characters or two characters and a directional arrow  with flashing and/or scrolling facility for the arrows. If required, messages can also be programmed which will scroll in the same orientation as the PCB.
  • 50mm high 4 characters blocks
  • 7 rows x 20 colums, 5.0mm Dots
  • Depth with window 44mm
  • Display screen size 152mm x 53.4mm
  • Direction arrow and gong control
  • Scrolling arrow or legend
  • Available in red, amber and green
  • Programmed to your requirements
  • Serial and parallel options
  • Horizontal PCB orientation only
Close

ULSP32H/V

The ULSP32’s can display up to 2 characters or one character with a directional arrow. Two character with override arrow is also available. The ULSP32’s have a flashing and/or scrolling facility for the arrows. If required, messages can also be programmed which will scroll in the same orientation as the PCB. ULSP32 – 7 rows x 10 columns, 3.0mm dots, 31mm high. Horizontal or vertical PCB orientation.
  • 30mm high 2 characters blocks
  • 7 rows x 10 colums, 3.0mm Dots
  • Depth with window 18.5mm
  • Display screen size 44.68mm x 39mm
  • Direction arrow and gong control
  • Scrolling arrow or legend
  • Available in red, amber and green
  • Programmed to your requirements
  • Serial and parallel options
  • Horizontal or vertical PCB orientation
Close

ULSP52H/V

The ULSP52’s can display up to 2 characters or one character with a directional arrow. 2 character with override arrow is also available. The displays can also be programmed for vertical mounting.  ULSP52’s have a flashing and/or scrolling facility for the arrows. If required, messages can also be programmed which will scroll in the same orientation as the PCB.
  • 50mm high 2 characters blocks
  • 7 rows x 10 colums, 5.0mm Dots
  • Depth with window 18.5mm
  • Display screen size 76mm x 53.4mm
  • Direction arrow and gong control
  • Scrolling arrow or legend
  • Available in red, amber and green
  • Programmed to your requirements
  • Serial and parallel options
  • Horizontal or vertical PCB orientation
Close

VRS52H/V

The VRS52H/V’s can display up to 2 characters or one character with a directional arrow. 2 character with override arrow is also available. The displays can also be programmed for vertical mounting.  VRS52H/V’s have a flashing and/or scrolling facility for the arrows. If required, messages can also be programmed which will scroll in the same orientation as the PCB.
  • 50mm high 2 characters blocks
  • 7 rows x 10 colums, 4.0mm Dots
  • Blocks have 1.5mm stainless steel (316) front
  • Block body is bonded to stainless steel font
  • Highly vandal resistant EN81-71 cat 2
  • Wide viewing angle inexcess of 150 degrees
  • Depth with blocks 23mm
  • Display screen size 76mm x 65mm
  • Direction arrow and gong control
  • Scrolling arrow or legend
  • Available in red, amber and green
  • Programmed to your requirements
  • Serial and parallel options
  • Horizontal or vertical PCB orientation
  • Horizontal and vertical linish option
Close

VRS53H

The VRS53H is a highly vandal resistant display unit, providing clear character illumination and identification for all lift applications.  The indicator units come in a choice of four colours: red, green, blue or amber. The digital display together with its encoders are designed to be compatible with all makes of lift equipment and meets M2/S2 Building Regulations, EN81-70 and EN81-71 Cat 2. Each unit is programmed to meet your specific requirement, just advise us of the legends you wish to be displayed.
  • Highly vandal resistant
  • 50mm high 4 characters blocks
  • 7 rows x 15 colums, 4.0mm Dots
  • Blocks have 1.5mm stainless steel (316) front
  • Block body is bonded to stainless steel font
  • Highly vandal resistant EN81-71 cat 2
  • Wide viewing angle inexcess of 150 degrees
  • Depth with blocks 23mm
  • Display screen size 114mm x 65mm
  • Direction arrow and gong control
Close

VRS54H

The VRS54H is a highly vandal resistant display unit, providing clear character illumination and identification for all lift applications. The indicator units come in a choice of four colours: red, green, blue or amber. The digital display together with its encoders are designed to be compatible with all makes of lift equipment. Each unit is programmed to meet your specific requirement, just advise us of the legends you wish to be displayed.
  • Highly vandal resistant
  • 50mm high 4 characters blocks
  • 7 rows x 20 colums, 4.0mm Dots
  • Blocks have 1.5mm stainless steel (316) front